Structured Networking (176 products)

Unloaded 24 Port Shielded Cat6a Keystone Jack Patch Panel

The Connectix 24 Way Keystone Patch Panels offer high density and the capability for 10G data transmission performance levels. Supplied unloaded - the patch panel installation and termination time can be greatly reduced when Connectix Tool-less Snap-to-fit Keystone Modules are used in the panel. To further increase on-site installation efficiency, Connectix Express Pre-terminated and Pre-tested Modules can also be used. Features:Fully shielded High density, 24 ports Suitable for FTP tool-less Keystone Modules Suitable for Connectix Express... More Info

12x Gigabit RJ-45, Cat. 5e, Unshielded, Black

- 12 x Gigabit RJ-45 ports;- 10 inch wide patch panel is well suited for home and SMB applications;- Designed for Category 5e cabling;- Includes cable management holders, tie, and port labels;- Use with TRENDnet TC-PDT Punch Down Tool.The 12-Port Cat. 5e Unshielded Patch Panel, provides a 100MHz connection to 8 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port... More Info

Blanking panels for 19" cabinets, available in 1u and 2u

These 19" cabinet blanking panels are ideal for keeping your cabinet neat, tidy and working efficiently by blanking off any unused space. When used in an environment with servers, they will help stop front to back air movement within the cabinet, protecting your servers from warm air from the rear of the cabinet. More Info

Surface Mount Back Boxes - Available in Single or Double Gang

More Info

Steel Wire Armoured Cat6 Solid Core Cable Suitable for Direct Burial

Connectix armoured external Cat6 UTP Cable is designed for external use and direct burial. Cable is cut to length and must has a minimum order quantity of 30mt. Connectix Cat6 UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements.Features: Cat6 performance External grade suitable for direct burial Steel Wire Armoured UL tested... More Info

Cat6a FTP Crimp plugs for stranded Patch Cable, available individually

These two piece Cat6a FTP RJ45 plugs are suitable for use only with Cat6a Patch Cable (not solid core cable). They are sold individually and compatible with our universal RJ45 crimp tool. More Info

Modular adapter that has a DB9 female connector that plugs into DB9 RS232...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

Available in 305m Box.

Connectix Category 6A F/FTP Cable has been designed to provide the exceptional performance required to support extremely high speed applications, including 10-Gigabit Ethernet.The cable consists of 4 screened pairs, drain wire and additional outer foil. It helps to alleviate the problems of NEXT and alien crosstalk. The sheath is a Low Smoke Zero Halogen (LSZH) material, as specified in many public buildings. This cable has a Euroclass rating of B2ca, so ideal where BS6701 compliance is required. Supplied in 305m boxes More Info

24-Port Cat6 Wall-Mount Feed-through Patch Panel

Tripp Lite's 24-Port Cat6 Feed-Through patch panel provides patching without punching down bulk wire to the back of the panel. Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring. 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel. - Cat6 RJ45 Jacks on both sides of the panel - Installs easily in 19" racks or wall-mounts - Cable management bar keeps patch cables tidy - 24-Port Cat6 Feed-Through... More Info

Extra long Booted Cat6 Patch Leads - Available from 30mt to 90mt

Connectix Cabling System Long RJ45 Patch leads are available in lengths from 30mt to 90mt. These RJ45 leads are made to order using high quality Cat6 connectors Cat6 UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info

TC-P08C6, 8-port, RJ-45, Black

The 8-Port Cat. 6 Unshielded Patch Panel, model TC-P08C6, provides a 250MHz connection to 8 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port allows users to label respective connections. Use with TRENDnet’s Punch Down Tool with 110 and Krone Blade, model TC-PDT, and RJ-11/RJ-45 Crimp/Cut/Strip Tool, model TC-CT68.Features:-8 x 1000Base-T Gigabit RJ-45... More Info

Right Shielded Cat 5e RJ45 Patch Panel - Available in 24 Port

The Connectix 2020 Series FTP Patch Panel is an alternative to the Standard Enhanced Category 5e FTP Panel. It offers the same Enhanced Category 5e performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. All sockets in the panel are commonly linked through the panel and can be grounded to the rack using the earth wire provided. Enhanced Category 5e panels provide exceptional performance for high speed LANs... More Info