Patch Panels (78 products)

16-port Cat5/5e Unshielded Patch Panel

- Rack mount 16-port Gigabit ready panel- Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches- Ideal solution for Ethernet, Fast Ethernet and Gigabit applications- Use with TRENDnet TC-PDT Punch Down ToolPrepare yourself for Copper Gigabit Ethernet with TRENDnet´s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet´s 16-port 350Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T)... More Info

Blanking Panel, 1U, Black, Plastic

Eaton offers blanking panels in a variety of styles including tool-less, adjustable expanding, and with cable pass through. The width meets EIA-310-D standards and comes in various heights (depending on style). Most panels are bulk packed in quantities of 10 and 100. More Info

48.26 cm (19 ") , 12 SC ,E2000, RAL7021

19" Splicebox,sl.unit,RAL7021- 12 SC ,E2000 spx,MTRJ,LC dpx More Info

Blanking Panel, 1U, Black, Plastic, 10 Pack

Eaton offers blanking panels in a variety of styles including tool-less, adjustable expanding, and with cable pass through. The width meets EIA-310-D standards and comes in various heights (depending on style). Most panels are bulk packed in quantities of 10 and 100. More Info

Blanking Panel, 1U, Black, Plastic, 100 Pack

Eaton offers blanking panels in a variety of styles including tool-less, adjustable expanding, and with cable pass through. The width meets EIA-310-D standards and comes in various heights (depending on style). Most panels are bulk packed in quantities of 10 and 100. More Info

Cat5e Patch Panel IEEE 802.3/u/ab, 1000Base-T Gigabit Ethernet

With tilt swivel, with Molex adapter system. 2A charger.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).12/24 Volt. The product is... More Info

48-port, RJ-45, 2U rack, black

Solid and reliable terminations for copper cabling featuring a minimum of 3 mm 50 micro-inch gold-plated jack contacts Compatible with both 110 and Krone punch-down tools Supports 22 to 26 AWG stranded and solid wire For use with unshielded twisted pair (UTP) Cat5e network cable Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications Connects 48 RJ-45 ports to a network Occupies 2U rack height Meets 19" rackmount standards Lifetime Warranty More Info

2U Hinged Wall-Mount Patch Panel Bracket

Tripp Lite's heavy duty 14-gauge steel, 2U (3.50") wall mount patch panel bracket, is the ideal alternative to a full size rack. Standard EIA 19-inch width allows installation of any 19inch patch panel. Laser cut metal ( not punched ) keeps all edges smooth, greatly reducing the possibility of injury, and, wear on cable jackets. Universal mounting for right or left hinging. Keyholes are spaced 16inches for mounting on wall studs. Stamped, horizontal reinforcement ribs allow for greater sturdiness and stability, and allow the addition of a... More Info

24-port, RJ-45, rack 1U, Black

- Solid and reliable terminations for copper cabling featuring a minimum of 3 mm 50 micro-inch gold-plated jack contacts;- Compatible with both 110 and Krone punch-down tools;- Supports 22 to 26 AWG stranded and solid wire;- For use with unshielded twisted pair (UTP) Cat6 network cable;- Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications;- Connects 24 RJ-45 ports to a network;- Occupies 1U rack height;- Meets 19" rackmount standards. More Info

ST Fibre Panels, Available with 4, 8, 12, 16 & 24 Ports, In Multimode and...

The range of Starlight™ 19” Rack Mount Patch Panels are available in 1u with a wide range of adaptor types and populations. The panels are manufactured from mild steel and are finished in a black powder coating (other colours on request). The patch panels feature adjustable mounting brackets, numbered adaptor ports, and a range of rear panel knock-outs to suit all common cable gland sizes. Panels are supplied fully loaded and complete with splice management. Features: High quality rigid mild steel construction Rear knock-outs to suit... More Info

Blanking Panel, 2U, Black, Plastic, 10 Pack

Eaton offers blanking panels in a variety of styles including tool-less, adjustable expanding, and with cable pass through. The width meets EIA-310-D standards and comes in various heights (depending on style). Most panels are bulk packed in quantities of 10 and 100. More Info

Blanking Panel, 2U, Black, Plastic, 100 Pack

Eaton offers blanking panels in a variety of styles including tool-less, adjustable expanding, and with cable pass through. The width meets EIA-310-D standards and comes in various heights (depending on style). Most panels are bulk packed in quantities of 10 and 100. More Info