Structured Networking (176 products)

Cat6 Leads Made from LDPE Cat6 Solid Cable for External Use

RJ45 Patch leads made from LDPE cable which are suitable for external use are available in lengths from 10mt to 75mt. Designed to run externally, these patch leads are ideal for using to link outbuildings. These RJ45 leads are made to order using high quality Cat6 connectors and black solid LDPE Cat6 UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Fully conforms to ANSI/TIA-568-C Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info

Shielded Cat5e RJ45 Patch lead, available in lengths up to 20mt and 5 colours

CCS Cat5e FTP RJ45 Patch Leads are designed to exceed the performance requirements of the Enhanced Category 5  Specification. CCS RJ45 Patch Leads are made from Cat5e stranded cable and are terminated using high performance shielded RJ45 plugs. Each lead is individually factory tested to the standard to ensure true standard compatibility. The fully shielded RJ45 leads increase signal isolation and prevent contaminant noise from entering the cabling system. We stock a variety of booted and unbooted leads in lengths from 0.5 to 5 metres and... More Info

High density 24 RJ45 Cat 5e ports in 1u of space

Connectix Enhanced Category 5e High Density Elite Patch Panels provide exceptional performance for high speed LANs including Gigabit Ethernet applications. The High Density format is ideal where cabinet space is at a premium. The panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel features easy to use slide in labels and the rear utilities colour coded cable saddles and hook and loop cable retainers. All Connectix Enhanced... More Info

High density 48 Cat 6 ports in 2u of space

Category 6 high density patch panels provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The high density format is ideal where cabinet space is at a premium. Available in a 2u 48 port format, these Category 6 high density panels achieve optimum transmission performance by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel features write-on designation labels for each port as well as... More Info

24 Port 1U Rackmount Cat 6 110 Patch Panel

Organize up to 24 Cat6 patch cablesThe C6PANEL24 24-port 110-type Rack Mount Cat 6 Patch Panel is color coded for both T568A and T568B wiring providing the perfect solution for any voice or LAN application.For hassle-free connections, the patch panel offers straight Cat 6 ports with 110-type termination, making it easy to insert and remove your cables. The 24-port patch panel also offers a quick and easy way to identify your cable runs, with port numbers clearly marked on the back of each RJ45 port, and a writeable/erasable marking surface... More Info

LJ6C Size Cat6a FTP Module for use in faceplates & floor boxes

Connectix Cat6a FTP Modules have been designed to provide the exceptional performance required to support extremely high speed applications such as 10-Gigabit Ethernet. Connectix LJ6C Modules are ideal for use in floorboxes, or any application that has an industry standard LJ6C aperture. Installation is made easy with the unique colour coded cable saddle and the use of industry standard IDCs. Connectix Cat6a FTP Modules are fully compliant with the ANSI/TIA Category 6A Standards and provide an outstanding transmission medium free from the... More Info

36 Port LC/LC 1U Rackmount Fiber Enclosure Patch Panel

Tripp Lite N492-016-LCLC-E is a pre-loaded, 36-port, LC/LC fiber patch enclosure that supports either Multimode or Singlemode LC Fiber cable patching. Features rugged heavy steel construction, with multiple rear entry points for trunk cable feeding into the panel, providing protection as well as internal management. 1U design takes up minimal space while allowing for maximum patching.- Supports up to 36 LC/LC patch connections- Multimode or Singlemode - Space saving 1U design, 19 rackmountable- 36 port LC/LC Feed Through couplers in a 1U... More Info

RJ45 Toolless Cat6a Keystone Jack Module

Connectix Cat6A Keystone Modules have been designed to provide the exceptional performance required to support extremely high speed applications, including 10-Gigabit Ethernet. When used with Connectix Cat6a Cable, the Category 6A Keystone Modules provide an outstanding transmission medium free from the problems of alien crosstalk. The tool-less and snap-to-fit module ensures a quick and easy to terminate installation, and the standard Keystone fitting allows the use of the same module in patch panels, wall outlets and a variety of other... More Info

48-Port CAT 5e RJ-45 UTP 48.26 cm (19 ") Rack Mount Patch Panels

- Rack mount 48-port Gigabit ready panel- Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches- Ideal solution for Ethernet, Fast Ethernet and Gigabit applications- Use with TRENDnet TC-PDT Punch Down ToolPrepare yourself for Copper Gigabit Ethernet with TRENDnet´s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet´s 48-port 350 Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T)... More Info

Right Angled Cat 6 RJ45 Patch Panel

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination and cable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds the... More Info

Cat6 UTP Solid Core PVC Cable available in 100m & 305m boxes

Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements. Cat6 UTP PVC Cable Details: Features:Category 6 performance... More Info

EuroMod size (25x50mm) shielded RJ45 modules

Cat5e RJ45 modules comply with the EIA TIA Standard for Cat5e. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress. Details: Features: Cat5e Compliant Overall dimensions 50 x 25mm Fits 27mm back box when used with bevelled faceplate Built in slide label system Lifetime product warranty 25 year system warranty available More Info