List of products by manufacturer Connectix Cabling Systems
Connectix Cabling Systems (CCS) was formed in 1993 and has since become a leading manufacturer of communication products for data and voice. They have warehouses throughout the UK each holding extensive stock.
CCS manufacturer their own range of patch panel, server cabinet and data cabinet. They also produce their own patch leads, network cable and fibre cable, each one tested to the highest industry standards and all available for next day delivery from Netstore Direct.
Simple tool used to remove PatchLock Leads from Sockets
This simple tool is compatible with the PatchLock RJ45 Patch Leads and used to remove the leads from RJ45 Sockets More Info
Universal RJ45 Crimp Tool
This universal crimp tool works with RJ45 and RJ12 plugs. More Info
Modular adapter that has a DB9 female connector that plugs into DB9 RS232...
This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info
Jack to Jack Keystone Jack Module
The Keystone Couplers requires no termination, just simple plug in RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e & Cat6 standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Cat5e & Cat6 hardware performance More Info
Shielded Cat5e RJ45 Patch lead, available in lengths up to 20mt and 5 colours
CCS Cat5e FTP RJ45 Patch Leads are designed to exceed the performance requirements of the Enhanced Category 5 Specification. CCS RJ45 Patch Leads are made from Cat5e stranded cable and are terminated using high performance shielded RJ45 plugs. Each lead is individually factory tested to the standard to ensure true standard compatibility. The fully shielded RJ45 leads increase signal isolation and prevent contaminant noise from entering the cabling system. We stock a variety of booted and unbooted leads in lengths from 0.5 to 5 metres and... More Info
Metal Faceplates pre-loaded 1 Cat6 UTP Module available in 7 finishes
Single gang metal faceplate loaded with one Cat6 module Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with the... More Info
Metal Faceplates pre-loaded 2 Cat6 UTP Modules available in 7 finishes
Single gang metal faceplate loaded with two Cat6 modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with... More Info
The Connectix Cabling System Single gang Office style faceplates are industry standard size and are compatible with all euro style modules. The rounded edges and raised surface give these faceplates a nicely styled finish. Each faceplate is supplied with fixing screws and compatible with Connectix Cabling system euro style modules, Keystone Fascia, ½ Blank and 1/4 blanks.Ideal for use with our SingleGang 'Office' Backbox Part number 008-010-001-30 More Info
Connectix Cabling System Office Style Faceplates with its rounded corners fit Perfectly into this surface mount backbox. Uncluttered internal design Tough Shatter Resistant PVC Also available in Doublegang Ideal for use with our 'Office style' Faceplate Part Number:008-001-003-52 More Info
Coupler fitted with RJ45 female sockets at either end
Couplers suitable for linking two RJ45 Patch leads together, fitted with RJ45 female sockets at either end More Info